Basic Spiral Weave
This weave can be used for bracelets,
necklaces, straps, or whatever.
Although the pattern collapses
if both ends are not held taught.
I had to draw this one as it
was impossible to hold the weave and scan it at the same time.
1. Start with closing one ring through another.
2. Add another ring as shown (blue ring).
3. Add another ring as shown (green ring).
4. Continue adding rings in the same fashion until the desired length is obtained or you go crazy.
5. Here is the resulting chain using 14ga Aluminum rings.
Note: A full 'spiral' will occur at different ring counts with different gauge rings.